General :  Phorum 5 The fastest message board... ever.
Topics of Potential Interest to NJSAS Members 
Goto Thread: PreviousNext
Goto: Forum ListMessage ListNew TopicSearchLog In
Gold ore processing process and production line equipment introduction
Posted by: liuyi (101.81.160.---)
Date: November 05, 2019 08:22PM

Wall systems with sidings with good drying potential, such as aluminum or vinyl, may be less likely to suffer damage than synthetic stucco, for example, which has poor drying potential. When looking at the exterior surfaces of the building, look first at the cladding materials and determine if they are in good repair. Secondly, try to determine how water
" attitudes to timber decking forest and wood products australia , cheapest outdoor flooring for outdoor norway "
might get into the wall system and whether there are any areas where you might reasonably suspect concealed damage. Inspection of the building interior should be focused onvulnerable areas that were noticed outside. In some instances the moisture getting into the building envelope will show up on the interior finishes. However, damage to wall
assemblies, doesn always show up on the building interior, at least not in the early stages. Paying attention to the drying potential of the cladding system installed. Brick veneer systems with vented rain screens have good drying potential, whereas most stucco systems do not. Coverings and materials placed too close to grade can have a destructive
" wickes or homebase for fence panels , pvc decking weight per sq foot "

Sorry, only registered users may post in this forum.
This forum powered by Phorum.